Ionic Stainless Nerf Bars Ford Bronco - Fullsize 1980-1996

Ionic uses top quality 304L stainless steel and it is polished to a mirror-like finish that almost looks like chrome. It is actually superior to a chrome plated finish, because chrome can chip and flake off over time. This stainless alloy and finish will look fantastic on your truck for years and years! Don't settle for the cheaper stainless alloys out there, like 200 grade stainless, which is barely stainless, and will easily pit. These bars are stainless all the way through.

Ionic also uses RECESSED step pads (not cut out) that prevent slipping in almost any weather. The recess also means the integrity (strength) of the nerf bar isn't compromised. Speaking of strength, these exceptional bars will support up to 300 lbs before flexing and 350 lbs before bending. Another brilliant benefit of the Ionic nerf bars is the simple, 30 minute, NO DRILL installation! They install with simple hand tools, so there is no need to bring them to a shop for professional installation, YOU become the professional! The black powder coated brackets are specifically designed for each vehicle so that they bolt right onto factory holes.

We truly believe that you will not find a better product at this low price! That is why it is consistently a top seller, and one that looks great on any truck.

IMPORTANT NOTES:

The price for all Ionic nerf bars are for a pair (2).

Regular cab trucks have a single step pad on each bar, while most others have two step pads per bar.

The STYLE of the nerf bars will vary depending on your truck/SUV.
Some vehicles get nerf bars that have a 90 degree bend on both ends.

Some vehicles get bars that are bent to 45 degrees on both ends.

Some vehicles get bars that are bent to 90 degrees on one end and are straight at the rear.

Please call us if you have a question about what style your vehicle will receive. We are happy to help!

Q: How much weight will the bars support?
A: They are rated at 300 lbs before flexing and 350 lbs before bending.

Q: What is the warranty on the stainless steel?
A: The stainless steel is backed by a Limited Lifetime Warranty.

Q: What material are the brackets made of?
A: They are made of galvanized steel with a black powder coat finish.

Q: Is there any drilling required to install?
A: Most applications are a no drill installation. Only the Jeep CJ
1997-1986, Jeep Wrangler 1997-2006, Ford F150 Super Cab and Reg Cab
1997-1998, and the Ford Ranger (some models) require drilling.

Q: How low will the bars sit off the vehicle?
A: Typically, they will have a standard 2" drop.

"Thank YOU for for the expeditious way you handled our order,the s.s running boards looked great.WE are still waitng for our new 2011 F-350 to arrive. WE will be only to happy to send a photo once we put them on."
- Susan, Canada

"My expericence was great. Got my delivery on time and with the easy to install manual made it a great experience. Very easy and it looks great. Just as good as the dealers running board for a fraction of the price. Thanks."
- B. Torres, New York

"Great job as always."
- Mike, Michigan

"I think the quality is just great. It looks fantastic! The service person was extremely nice and helpful. I was surprised! The product was shipped very quickly."
- Steven, Michigan

"I love it and so does my husband. I was always afraid of falling backwards trying to get into the truck cab. Now, no worries. Thanks. It went smoothly after figuring out where the bolts attached."
- Judy, Georgia

"the product was top of the line verry good"
- Martin, Pennsylvania

"The quality was very good, shipped okay. Instruction were a little fusy, but husband figured it out, picture must have been old"
- Julie, Iowa

"Product is Fantastic! Installation was Easy! The service and shipping was Outstanding!"
- Gregg, Florida

"Excellent product. Easy install with good instructions"
- RD, California

"I've had it on the vehicle for only a couple of weeks, so its tough to judge the quality at this point. Initial impression is good, however. reading the instructions BEFORE installing would've certainly helped in my case. Ã Overall, installation was straight forward."
- Oleg, Texas

"The stainless steel running boards look great on my truck!!! My vertically challenged wife loves that now she can easily get into the truck even with a dress on! Very easy intallation and everything fit very well. Took about an hour would have been faster had I used the impact wrench to remove the body bolts. Received the running boards sooner then I expected them to arrive here in Colorado."
- Larry, Colorado

"Great product exactly what was expected. Easy install directions were extremely clear. Fast on time shipping."
- Ron. California

"Great! Service was great and I was surprised how fast I received the steps."
- Carol, Oklahoma

"I love my new running boards, they arrived withing 4 days, and was very easy to install. Really enhanced the look of my truck. shipping (tracking number) was outstanding"
- David, Florida

"so far excellent, but time will tell Shipping was fast!"
- Ray, Ohio

Ionic Stainless Nerf Bar Installation from Truck XL Inc on Vimeo.

Almost all of the Ionic Nerf Bars have a no-drill installation. There are only a few exceptions that you will find in our Q&A section. In the package with the two bars, you will receive 'vehicle specific' brackets and bolts that will ensure an easy installtion. Each set is made and tested to custom fit your vehicle. Most of the reviews that we get from customers say that it takes somewhere between 30 minutes to an hour.

We have install technicians on hand who have done these installations many times. They are professionals that are trained to be able to help you over the phone. Please do not hesitate to call us at 1-866-577-3079 for top of the line US sales and service.

Ionic Automotive specializes in helping the world step up into their vehicles. They offer various styles of running boards and nerf bars so that customers can choose one that best fits their style/needs. They range from a 3" to a 6" step. They make top quality products with top quality materials. Ionic Automotive continues to put out new products each year that seem to become popular.

Ionic Automotive's warehouse is located in central Florida. They have recently started making tonneau covers, but continue to specialize and focus on running boards/nerf bars.